305 Broadcast RPU-PACK Remote Broadcast Unit Package Includes:
– RPU Transmitter 20 W Available in 150? 470 – 830 960 MHz. With 3 MIC Line Inputs XLR Balanced MIXER
-Battery Belt Unit
-SRPU Receiver
-MagneticPortable Antenna
– SRPU Base Stylus Antenna

• Available in various ranges: 150 + 470 MHz, 830 + 960 MHz (+-10MHz sub-band)

• High power output level: IOW or 20W both setting 100% or 20%
• Easy setting frequency in two preset channels programming by the user
• Two headphone monitoring outputs
• Built in tre XLR audio balanced input channels Mixer with Micro Line select
• ALC circuit to keep modulation at proper level
• Friendly use
• Broadcast superlative audio quality
• Exceptional robustness and absolute reliability
• Battery belt power unit for over 2h lifetime at full power

• RPU Transmitter Technical Specifications			RPI-J Receiver mod. RAG
  Frequency Ranges:                                       150-470 and 830-960 MHz in 20MHz sub-bands			Frequency Ranges		200-960 MHz <20MHz sub-band
  Modulation:                                                       FM Class F3 or lower deviation upon request			Type of Modulation		FM Class F3
  Output Impedance & Connector:                 50 ohm type N female			VCO Tuning		25 MHz
  RF output power:                                           IOW or 20W			Frequency Stability		± 2.5 ppm (Better on request)
  RF output power adjusting:                         100% or 20% in front panel selectable			Synthesizer Step		25KHz
  Harmonic Frequencies Level (ref. to carrier).• < -60 dB			Image Rejection		60dB Typ.
  Spurious Frequencies Level (ref. to carrier): < -80 dB			RN Noise Figure		6dB or lower
  Frequency stability:		2,5 ppm
  Input Impedance:		600 ohms or greater		Distorsion		< 0.5% (TYP 0.2 % @ 1KHz)
  Input Level:		– 6 dBm to +10 dBm nominal for nominal deviation adj.		Base Band		30Hz*60KHz ± 0.08 dB
  Mono Input (with pre-emphasis):		Pre-emphasis 50 75 ps selectable		SIN Ratio		> 72 dB with 0.2 mV
  Audio Bandwidth:		Standard 7,5 KHz others upon request		Deenphasis		50 or 75 PS int. selectable
  Distortion (THD) in compression:		<2%		RF Connectors		N-F 50 Ohm
  SIN Ratio (ref. to 25 KHz 1000 Hz):		> 50 dB		B. Band-IF Conn.		BNC-F
  Power requirements:		Operating voltage 100 to 240 ± 20% Vac 50 60 Hz External DC 13.5V 3-5 A		Base-Band Imp.		< 30 Ohm
  Power consumption:		50 70 VA		Cooling		Forced air
  Battery pack (optional):		13.5 Vdc 9.0 A		P. Temp. Range		o +500 C
  Operating temperature		O to +40 0 C		Maximum Umidity		95%
  Relative humidity		95% max.		AC Supply		100 + 240 Volt; 47 + 63 Hz
  Dimensions:		Width 20cm Height 9 cm Depht 27 cm		Dimension		1 Units Rack 19 44 cm Depth
  Weight:		4.5 kg		Weight		6.2 Kg

   

  SRPU Receiver mod. RAG

  Title	Default Title